top of page

AutoCAD Plot Styles: CTB vs STB and How to Use Them

2 days ago
10 min read

Colored and monochrome plotted architectural plans

A plot style is a setting that controls how an object or layer looks on paper, whatever it looks like on screen. For most architectural work, use color-dependent tables (CTB): each AutoCAD color maps to one lineweight and one print color, so a clean layer-color scheme gives you a consistent sheet every time. Below you will find the difference between CTB and STB, the setup steps, the STB to CTB conversion and the fixes for a missing table.



TL;DR

 

  • A plot style changes only how objects plot. It overrides color, lineweight and linetype on paper and leaves your drawing untouched.

  • CTB tables work by color (256 fixed styles). STB tables use named styles you assign to objects or layers. CTB is the default and the simpler choice for layer-based drafting.

  • Open the manager with STYLESMANAGER, create a table with the Add-A-Plot Style Table Wizard, then attach it in Page Setup.

  • CONVERTPSTYLES switches a drawing between systems. Going from STB to CTB cannot be undone with the same command, so save a copy first.

  • A missing table is usually a folder path, permissions or template problem, and each has a quick fix.

 

Table of Contents

 

 

What plot styles actually do

 

A plot style is an optional method that controls how each object or layer is plotted. According to Autodesk’s plotting help, assigning a plot style overrides properties such as color, lineweight and linetype when you plot, and only the plotted appearance is affected. Your model stays exactly as drawn.

 

That separation matters because screen colors and paper output have different jobs. On screen you want distinct colors so you can tell walls from dimensions on a dark background. On paper you usually want black linework with a controlled hierarchy of thicknesses. Autodesk’s layout tutorial makes the same point: colors that work on screen may not suit hardcopy, so a plot style lets a multi-color drawing plot as monochrome.

 

A plot style table is a file that collects a group of plot styles so you can reuse them. Autodesk lists the settings each style can hold:

 

  • Color

  • Dither

  • Grayscale

  • Pen Number

  • Virtual Pen

  • Screening (0 is white, 100 is full intensity)

  • Linetype

  • Adaptive

  • Lineweight

 

Dithering switches on automatically when screening is 99 or lower. For architectural sheets you will mostly touch three of these: Color (set to black), Lineweight and Screening (to grey out background elements such as an underlay).

 

A quick example

 

Say your layers use these colors:

 

Layer

AutoCAD color

Plot color

Lineweight

A-WALL

1 (red)

Black

0.50 mm

A-DOOR

3 (green)

Black

0.25 mm

A-DIMS

4 (cyan)

Black

0.18 mm

A-FURN

8 (grey)

Black, screening 50%

0.13 mm

With a CTB table, you set that once. Every object on a red layer plots at 0.50 mm in black on every sheet that uses the table. That is why layer-color discipline and plot styles belong together, a topic we cover further in our guide to AutoCAD drawing standards.

 

CTB vs STB: the difference that matters

 

AutoCAD has two kinds of plot style table, and a drawing uses one or the other.

 

 

CTB (color-dependent)

STB (named)

File extension

.ctb

.stb

How styles are chosen

By the object’s color: every red object plots the same way

By a style name assigned directly to an object or layer

Number of styles

Fixed at 256, one per color

As many or as few as you define

Can you add or delete styles?

No, only edit them

Yes

Same-color objects

Always plot identically

Can plot differently

The Plot Style Table Settings help adds that the default behavior is to use color-dependent plot styles, with the system variable PSTYLEPOLICY set to 1. Color-dependent tables key off AutoCAD Color Index numbers 1 to 255.

 

Which should you choose?

 

For most architects and technicians, CTB. The reasoning is practical:

 

  • Layers already carry color. If your template ties each layer to a color, a CTB table turns that into lineweights automatically, with nothing extra to assign to objects.

  • It is the default. New drawings open in color-dependent mode unless the template says otherwise, so you rarely fight the software.

  • It is easy to audit. If a line prints too thick, you check its color. With STB you must check whether the object, its layer or the table is responsible.

 

STB makes sense when you need two objects of the same color to plot differently, for instance a project where color is used for something other than hierarchy. It gives more control, but it also needs more discipline in assigning styles to every layer and object.

 

Neither system fixes inconsistent drawing habits. CTB needs consistent color use and STB needs consistent style assignment, so your template and page setups matter either way. Our walkthrough on AutoCAD architectural drawing setup shows how to build that into a template.

 

How to set up and use a plot style table

 

This is the routine from a blank drawing to a plotted sheet.

 

Step 1: Check the drawing mode

 

Type PSTYLEMODE. A value of 1 means the drawing is color-dependent (CTB), and 0 means named (STB). Autodesk explains that this variable determines the style of a new drawing, and you can set the default for new drawings in the Options dialog box on the Plot and Publish tab, using the Plot Style Table Settings button.

 

Where it goes wrong: a drawing started from an old template or sent by a consultant may be in the other mode. Then the plot dialog lists only the table type that matches the drawing, and the tables you expect look missing.

 

Step 2: Open the Plot Style Manager

 

There are three routes, according to the same Autodesk article:

 

  1. File menu, then Plot Style Manager

  2. Tools, then Options, then the Plotting tab, then Add or Edit Plot Style Table

  3. Windows Start menu, Settings, then Control Panel, then Plot Style Manager

 

The fastest is typing STYLESMANAGER at the command line. It opens the folder where your tables live.

 

Step 3: Create or install a table

 

In that folder, double-click the Add-A-Plot Style Table Wizard icon and follow the prompts to build a new CTB or STB. Autodesk’s folder guide also says you can drop existing CTB and STB files into that folder, and reopening AutoCAD refreshes the list in the Plot dialog. If the wizard icon has vanished, often because IT moved things, the same article explains how to restore it by creating a shortcut to styshwiz.exe from the AutoCAD program folder.

 

The default Windows 10 location is a Plotters\Plot Styles folder inside your user profile’s AppData\Roaming\Autodesk\AutoCAD folder, under the version and language subfolders. On macOS it sits under your user Library, in Application Support. Autodesk also notes that AutoCAD can use a plot style file stored in the same folder as the drawing.

 

A sensible office set is small. Keep two or three tables rather than dozens:

 

  • A main color table for general drawings, with site boundaries and hatches in a few colors

  • A fully monochrome table for black-and-white printing

  • Optionally, a third with extra colors for engineering information such as electrical or drainage

 

Step 4: Map colors to lineweights before you print

 

Open the table in the editor and, for each color you actually use, set the plot color, lineweight and screening. Start with the basic colors 1 to 10, as most architectural drawings never need more. Then check that every layer color in your template appears in the table with the intended weight.


Layer colors mapped to plot output settings

Where it goes wrong: colors that are close on screen (say 30 and 40) can end up with very different weights, or a layer left on a color you forgot to map plots at the default. Walk through your layer list against the table before the first print of a project, not after the print has come back wrong.

 

Step 5: Apply it to the layout

 

Open the Plot dialog (or Page Setup Manager), pick the plotter, then choose the table in the Plot Style Table (Pen Assignments) section. Autodesk’s tutorial demonstrates this with monochrome.ctb: the preview switches from colored objects to black only. Then choose Apply to Layout so the setting stays with the sheet.

 

For named page setups, Autodesk’s Page Setup Manager help covers selecting, creating, editing and displaying plot styles through Page Setup Manager and Modify. Saving the table into a named page setup in your template means every new sheet starts correct.

 

If you export PDFs rather than print, the same table applies. See our notes on AutoCAD PDF export settings for how plotter choice and plot style interact in the output.

 

Convert STB to CTB (and back)

 

You will usually need this when a consultant’s drawing arrives in the other system. The command is CONVERTPSTYLES, and Autodesk’s Tuesday Tips article notes it runs only from the command line.

 

STB to CTB

 

  1. Save a copy of the drawing first.

  2. Type CONVERTPSTYLES.

  3. Confirm the prompt that named plot styles will be removed.

  4. Pick your CTB table in the Page Setup or Plot dialog.

 

Autodesk’s Plot Style Table Settings help warns that once a drawing has been converted from named to color-dependent, you cannot use CONVERTPSTYLES to convert it back. That is why the copy matters.

 

CTB to STB

 

This takes two parts, per Autodesk’s support article: run CONVERTCTB to save a CTB-based plot style as an STB, then run CONVERTPSTYLES and select that STB.

 

Autodesk’s CONVERTPSTYLES reference describes what happens: converting to named styles sets PSTYLEMODE to 0 and attaches the chosen table to model space and every layout. Objects that matched their layer’s style become ByLayer, and the rest get a named style with the same properties. Converting to color-dependent sets PSTYLEMODE to 1.

 

After either conversion, plot a test sheet and compare it with the previous output, since layer colors and table mapping decide the result.

 

Fix a missing plot style table

 

The most common complaint on this topic is a table that is not in the list. Work through these in order.

 

  1. Check the mode. If PSTYLEMODE is 0, you will only see STB files, and if it is 1, only CTB files. Match the drawing to the table type you want, or convert it as above.

  2. Check the folder. Type STYLESMANAGER and confirm the file is there. Autodesk’s missing or damaged file article says default CTB and STB files can be retrieved from a hidden UserDataCache\Plotters\Plot Styles folder inside the AutoCAD program folder.

  3. Look at the causes Autodesk lists. The same article names a damaged or absent file, a file in a different location than AutoCAD expects, a recent Reset To Default, an outside drawing referencing a custom plot style in its page setup, limited folder permissions, a location inside a Dropbox cache folder, a template with a different plot style type than you want, an imported page setup of a different type, and a page setup not applied to the sheets.

  4. Restore the wizard if needed. If the Add-A-Plot Style Table Wizard icon is gone, rebuild the shortcut as described earlier.

 

If you work on a managed office machine, permissions and folder redirection are the usual culprits, and your IT team can fix those quickly once you point them at the exact folder.

 

Perspective

 

Plot styles are where a lot of people first feel that AutoCAD is fighting them. The drawing looks right on screen, then the print comes back with walls too light and dimensions too heavy. The cause is almost never the software. It is that nobody decided, in advance, what each color means on paper.   Our advice is to treat the plot style table as part of your template, not as a last-minute print setting. Pick a small color palette, tie each color to one lineweight, save the table and the page setup in the template, and every sheet you ever start inherits the decision. That is the project-based approach we teach: you learn the setting in the context of a real drawing set, so you see why it exists.   We teach CTB first for architectural drawings because it keeps cause and effect visible. Change a layer’s color, and you know exactly how it will plot. Once that habit is solid, named styles are a small step, and the conversion commands stop being scary.   Steve

 

Build the whole workflow, not just one setting

 

Plot styles are one link in a chain: layers, colors, templates, viewports, page setups and output. If you want to learn that chain on a real project rather than piece by piece, our AutoCAD Training course takes you from beginner to advanced for €79, one-off. It is project-based, includes direct trainer support and lifetime access to the materials, comes with a certificate and is backed by a money-back guarantee.


S15studio

If you work in both AutoCAD and Revit, the Complete Revit and AutoCAD Training covers both programs, and Steve Fagan, an Autodesk Certified Trainer, leads the training. To build the surrounding habits, start with getting started with AutoCAD or the common AutoCAD drafting mistakes that cause print problems.

 

FAQ

 

What is the difference between CTB and STB?

 

CTB (color-dependent) tables assign plot properties by an object’s color, with 256 fixed styles, so every red object plots the same way. STB (named) tables hold user-defined styles that you assign directly to objects or layers, so two objects of the same color can plot differently. CTB is the default and the more common choice in architectural drafting.

 

How do I use a CTB file in AutoCAD?

 

Copy the .ctb file into your plot styles folder, which you can open by typing STYLESMANAGER. Reopen AutoCAD if it does not appear. Then open the Plot or Page Setup dialog, choose the file under Plot Style Table (Pen Assignments) and select Apply to Layout. The drawing must be in color-dependent mode for CTB files to appear.

 

How do I switch from STB to CTB?

 

Save a copy of your drawing, then type CONVERTPSTYLES and confirm the prompt. The drawing becomes color-dependent and named styles are removed. Autodesk states you cannot convert back with the same command, so keep the original.

 

Why can I only see STB files in the plot style list?

 

The drawing is almost certainly in named plot style mode, where PSTYLEMODE is 0. AutoCAD shows only the table type that matches the drawing. Convert the drawing with CONVERTPSTYLES, or fix the template so new drawings start in color-dependent mode.

 

Sources

 

Recommended

 

 
 
 

Comments


s15studio logo
  • Instagram
  • alt.text.label.YouTube
  • alt.text.label.Facebook
  • alt.text.label.LinkedIn
  • Discord

As an independent instructor, I am not affiliated with, endorsed by, or sponsored by Autodesk in any way. The Autodesk trademarks and logos are the property of Autodesk Inc. and are used under license. Any information, materials, or training provided by me are solely for educational purposes and are not intended to promote or sell Autodesk products or services.  Any views or opinions expressed are solely my own and do not necessarily reflect those of Autodesk. By using my services, you agree to these terms and conditions. All material on this website, including but not limited to text, images, graphics, videos, and audio files, is the property of S15Studio and is protected by copyright law. No material from this

website may be reproduced, copied, downloaded, or distributed in any form without prior written permission from S15Studio. Unauthorized use or reproduction of any material on this website may result in legal action.

©2026 by S15Studio

bottom of page