Revit Object Styles: Control Line Weights, Patterns and Joins

Object Styles are the project-wide rulebook for how every Revit category looks: line weight, line color, line pattern and material. Set them once in the Manage tab and every view follows, unless a view or an element overrides them. Get that rule right and your drawings stop looking different from sheet to sheet. This guide shows where the settings live, how they differ from line styles and line patterns, and how wall joins and Disallow Join fit into the same graphic picture.
TL;DR
Object Styles live at Manage tab > Settings > Object Styles and set the default graphics for each category and subcategory across the whole project.
Views override them through Visibility/Graphics (VV or VG), and single elements through Override Graphics in View > By Element.
Line Styles are a separate list for detail lines, model lines and similar linework. Object Styles cover categories such as walls, doors and annotation.
Wall joins are geometry, not style, but the cleanup you see at intersections changes how your line weights read. Disallow Join stops a wall end joining; Allow Join restores it.
Work top-down: fix Object Styles first, then views, then individual elements.
Table of Contents
What Object Styles actually control
According to Autodesk’s Object Styles help, the tool specifies line weights, line colors, line patterns and materials for categories and subcategories of model elements, annotation elements and imported objects. A category is a family type group such as Walls, Doors or Windows. A subcategory is a finer slice inside it, for example the glass of a window, as opposed to its frame.
The settings are global. Autodesk’s visibility and graphics video help explains that a change to a category in the Object Styles dialog affects every view of the model. Each category carries two line weights:
Projection: used for the element seen from the view direction, such as a door in elevation or a wall below the cut plane.
Cut: used only when the element is sliced by the view’s cut plane. Otherwise the projection weight is used.
That distinction explains a common surprise. A wall in plan shows a heavy cut outline, but the same wall in a ceiling plan above the cut plane shows the lighter projection weight. Nothing is broken. You are looking at two different properties of the same category.
The graphics hierarchy in one picture
Revit resolves graphics in layers. Autodesk University’s guide by Steven Shell describes the order well:
Level | Where you set it | Scope |
Object Styles | Manage > Settings > Object Styles | Whole project, saved into the template |
View overrides | View > Graphics > Visibility/Graphics (VV or VG) | One view or view template |
Element overrides | Right-click > Override Graphics in View > By Element | One element in one view |
The higher the number of the level, the narrower the effect, and the narrower setting wins. If a wall looks wrong in one view only, the answer is almost never in Object Styles. Check the view’s overrides, a view template, or an element override. If it looks wrong everywhere, start with Object Styles.
If you want a structured routine for tracking down stray overrides, our five-step graphic overrides audit walks through it.
Where to find Object Styles and how to change them
Per Autodesk’s Modify Object Styles instructions, the path is short:
Go to the Manage tab and, in the Settings panel, click Object Styles.
Pick the Model Objects, Annotation Objects or Imported Objects tab.
Find the category and set the projection line weight and, if the category has one, the cut line weight. Then set line color, line pattern and material.
Click OK.
The three tabs map to three kinds of content. Model Objects are the physical building elements. Annotation Objects are tags, dimensions, text and similar drawing aids. Imported Objects cover categories that arrive with linked or imported CAD files, which matters if you work between AutoCAD and Revit.
A worked example: making exterior walls read clearly
Suppose your office standard calls for a heavy cut line on walls in plan and a light line on walls seen in elevation.
Open Object Styles > Model Objects and expand Walls.
Set the Cut line weight to a heavy number such as 5, and the Projection weight to a light number such as 2. These numbers refer to the line weights table, so your office values may differ.
Click OK and open a floor plan, a section and an elevation.
All three update together, because you changed the category once rather than view by view. For the line weight table itself, and how numbers map to printed thicknesses at different scales, see our guide to Revit line weights.
Subcategories: control parts of an element
You do not have to treat a category as one block. Autodesk’s help for creating Object Style subcategories says to open Object Styles, choose a tab, click New under Modify Subcategories, enter a name, pick the category it belongs to and click OK. Subcategories control the visibility and graphics of discrete geometry within a category.
This is also how families work. Autodesk’s family subcategories help explains that a family template assigns a family to a category with default line weight, color, pattern and material. Subcategories let different parts, such as the frame, sash, mullions and glass of a window, carry different materials. Drafting patterns can be applied to subcategories but model patterns cannot.
If you build your own families, assign geometry to subcategories as you model, not afterwards. It keeps glass, frames and swing arcs controllable from Object Styles and Visibility/Graphics. Our walkthrough on building one parametric Revit family shows the workflow, and the guide to Revit window families shows how subcategories pay off in a real family type.
When you load content from BIM object libraries, check which category and subcategories each family uses. A family built with the wrong category will ignore the line weights you set for the right one.

Object Styles, line styles and line patterns: which is which
These three get mixed up constantly, and they overlap in the Manage tab, so it helps to separate them by job.
Autodesk’s support article on the difference puts it this way: Object Styles define the default appearance of categories for every element in the category unless overridden. Line Styles define individual line types used by detail lines, model lines, room and area boundaries and Linework overrides. Custom line styles, and overrides to individual edges, are available only through Line Styles.
Setting | What it defines | Typical use |
Object Styles | Default graphics of a category or subcategory | Walls, doors, tags, imported CAD layers |
Line Styles | Named line types (weight, color, pattern) | Detail lines, model lines, room boundaries, Linework tool |
Line Patterns | The dash and dot sequence a line uses | Hidden, center, dashed lines, custom patterns |
Line Weights | The numbered thickness table | Feeds both of the above |
Autodesk’s Project Settings help lists Line Styles, such as a dashed line for reference planes, and Line Patterns, where you specify the pattern the line styles use, alongside Object Styles, Line Weights and Halftone/Underlay under the Manage tab settings.
The practical order is: define line weights, then line patterns, then line styles and Object Styles, which draw on both. If you want a dashed centerline, create or pick the pattern first, then apply it to a line style. For linework you place by hand, you will use Line Styles at Manage > Settings > Additional Settings > Line Styles and Line Patterns in the same menu. For element categories, you will use Object Styles.
Moving your standards between projects
Once you have a set of styles you like, do not rebuild them in every file. Steven Shell’s Autodesk University article notes that Object Styles are saved with the template, and that line settings can be moved between projects using Transfer Project Standards. Put your styles in a template and start each job from it.
Office standards live in templates, and a good template saves hours on every project. Our Intermediate Course covers professional templates and project resources as part of building real-world workflows.
Overrides: when a view should differ from the project
Object Styles are the default, and views are allowed to disagree. Autodesk’s Object Styles help states that these project-wide settings can be overridden view by view.
Use overrides for a reason, not out of habit. A sound rule of thumb:
Change Object Styles when the whole project should look a certain way, for example every wall cut at the same weight.
Change Visibility/Graphics when a view type needs a different look, for example lighter walls in a coordination view. Put this in a view template so it is reused.
Override by element only for a one-off, such as highlighting one wall in a presentation view.
The cost of the third option is that nobody can see it from the dialog. Six months later, a colleague wonders why a wall ignores the standard. Keep element overrides rare and you will always know where to look.
Level of detail interacts with all of this as well, since a coarse view may hide geometry that a fine view shows. Our guide to Revit detail level explains how it changes what your styles appear to do.
Wall joins: the geometry behind clean corners
Wall joins are not part of Object Styles, but they decide how those styled lines meet. Two walls with a perfect cut weight still look messy if the corner is not joined cleanly, so the two topics belong together.
Autodesk’s Wall Joins help states that Revit creates a butt join by default, with cleanup in plan views. You can change the join to Miter or Square-off, change the order in which walls butt up or square off, and set the join to clean up, not clean up, or follow the view default.
How to modify a wall join
Following Autodesk’s Modify Wall Joins video help:
Use the Wall Joins tool and hover near an intersection. A square target appears.
Click it, then choose the configuration with the radio buttons: butt, miter or square off.
Use Previous and Next to change which wall takes priority.
Set Display to control cleanup. With Don’t Clean, you will see a heavy line at the intersection, which is a fast way to diagnose a messy corner.
Wall cleanup
The cleanup setting explains most “why is there a line across my corner” questions. When joined walls clean up, their layers merge and the shared line disappears. When cleanup is off, each wall keeps its own outline, and the intersection reads as a heavy line. If a corner looks cluttered in one view but fine in another, check the join display and the view’s own settings before touching Object Styles.
Disallow Join: when to use it and how to reverse it
By default, Revit joins walls where they meet. Autodesk’s Disallow Wall Joins help says that selecting a wall and clicking Disallow Join stops that wall end from joining another wall. It is useful for expansion spaces, which the help illustrates with a 3/8-inch gap between walls, and for resolving complex joins. To restore it, click Allow Join near the end of the wall.
Two details save time:
Mid-end faces. Autodesk’s 2024 version of the help says to open a plan view where the mid-end face is visible, adjusting the cut plane height if needed. Select the wall and click Disallow Join above the face, or right-click and choose it. Allow Join works the same way.
Restoring an intersection. Autodesk’s cleanup options help says that disallowing a join at an intersection sets each wall end there to Disallow Join. To restore it, draw a selection box around the location so all ends are selected, because a single click picks only one, then choose Allow Join.
Complex joins
When several walls meet, the automatic result may not be what you want. Autodesk’s Edit Complex Wall Joins help advises against the Wall Joins tool for joins involving more than four walls or spanning multiple floors. Instead, select a joined wall and use its Drag Wall End control to move it out of the join, then drag it back to a different location. If the automatic join is wrong, disallow joins for that end, move it again and re-create the join with the Join Geometry tool. The help notes that complex joins can have hundreds of possible configurations, so a systematic order matters more than trial and error.
If your project relies on structural walls, the way you handle joins also affects how the walls read. See Revit load-bearing walls for how to identify and manage them.
A short checklist for a consistent drawing set
Use this order on any project, new or inherited:
Open Object Styles first. Confirm the cut and projection weights for walls, floors, doors, windows and annotation match the office standard.
Check subcategories. Make sure glass, frames, swings and hidden lines are separate where you need to control them.
Review line styles and patterns. Remove duplicates and anything imported from CAD files that nobody uses.
Inspect view templates. Look for overrides that contradict the project standard.
Clean up joins. Scan plan views with cleanup turned off to find unresolved corners.
Save it to a template. Next project starts from here, not from scratch.
Imported CAD is a frequent source of clutter. Layers from a DWG appear under Imported Objects, so an AutoCAD file with dozens of layers can bring dozens of line styles with it. If you move between both programs, our AutoCAD Training shows how drawings are organized on the AutoCAD side, which makes importing cleaner.
Our approach to teaching graphics
Most people learn Object Styles by accident: a drawing looks wrong, they click until it looks right, and nobody can say why it worked. We prefer to teach the hierarchy first. Project settings, then views, then elements. Once you know which level you are working at, you stop chasing overrides. That is why our courses are project-based. You build a real model, set up a template, hit the line weight and join problems that real projects produce, and fix them with a method. Our training is built on 20 years of Autodesk-certified experience, and you get direct trainer support while you work, plus lifetime access to the materials so you can return to a topic when a project demands it. If you are starting out, learn the graphics settings early. They shape every sheet you will ever issue. Steve
Learn Revit graphics on a real project
Reading about Object Styles helps, but the habit comes from setting them up on a model and seeing every view update. Our Revit Course Only is €79, one-off, and takes you from beginner to advanced through project-based lessons. It comes with direct trainer support, lifetime access to the materials, certificates and a money-back guarantee.

If you are new to the software, the Revit Introduction at €20 is a smaller first step, and the Worksharing Course at €15 covers team workflows. Prices are as published on our site, so check the course page when you buy.
FAQ
What is the difference between Object Styles and Visibility/Graphics?
Object Styles set the default graphics for a category across the whole project. Visibility/Graphics changes how a category appears in one view or view template, and can override the project default. If a change should apply everywhere, use Object Styles. If it should apply to one type of view, use Visibility/Graphics.
Why does my wall have a heavy line at the corner?
The most likely cause is the join cleanup setting. If the join display is set to Don’t Clean, each wall keeps its own outline and the intersection shows a heavy line. Select the join with the Wall Joins tool and switch the display back to clean up. If the corner involves several walls, a Disallow Join on one end may be the cause, so select all the ends with a selection box and choose Allow Join.
Where do I create a new line style or line pattern?
Go to Manage > Settings > Additional Settings and choose Line Styles or Line Patterns. Line Styles give you named line types for detail lines, model lines and room boundaries, while Line Patterns define the dash sequence those styles use. Create the pattern first, then apply it to a style.
Can I use Object Styles to change materials?
Yes. Each category in Object Styles has a material setting alongside line weight, color and pattern. Subcategories let different parts of a family carry different materials, such as the frame and the glass of a window.
Can Revit be self-taught?
Yes, but graphics settings are an area where a structured sequence saves time. A project-based course gives you the order to learn things in and a trainer to ask when a view will not behave. Our courses are designed that way.
Sources
Recommended

Comments