top of page

AutoCAD Scale Command: Factor, Reference and Viewports

3 days ago
8 min read

Architect scaling a floor plan in AutoCAD

The SCALE command resizes selected objects around a base point you choose. Type SC, select the objects, click the base point, then either type a scale factor or use the Reference option to give a current length and a wanted length. Most scaling mistakes come from mixing this command up with a layout viewport scale, which changes how a drawing is printed and not how big the geometry is. This guide covers both, with worked numbers.



TL;DR

 

  • Run SC, select objects, pick a base point, type a factor. Above 1 enlarges, between 0 and 1 shrinks.

  • Use Reference when you know a real length but not the factor: type R, pick two points, type the true length.

  • Draw at 1:1 in model space. Never scale geometry to 1:50 or 1:500 for printing. Set the viewport scale in the layout instead.

  • To fix an imported drawing, divide the intended length by the measured length of a known object to get the factor.

  • Pick a meaningful base point, such as a wall corner or grid intersection, so the geometry stays aligned.

 

Table of Contents

 

 

What the SCALE command does

 

According to Autodesk’s AutoCAD 2026 documentation, SCALE enlarges or reduces selected objects while keeping their proportions. The scaling is uniform: height and width change by the same amount, as this college CAD text explains. A circle stays a circle and a rectangle keeps its shape. If you need to change only one direction, you are looking for the STRETCH command, not SCALE.

 

Three inputs control the result:

 

  1. The objects. Whatever you select is resized. Anything not selected stays where it is, so a scaled plan can suddenly stop lining up with its dimensions or title block.

  2. The base point. This point does not move. Everything else grows away from it or shrinks toward it.

  3. The scale factor. A number that multiplies every length in the selection.

 

The command alias is SC. You can also find the tool on the Home tab, in the Modify panel.

 

Scaling with a scale factor, step by step

 

This is the method you use when you already know the multiplier.

 

  1. Type SC and press Enter.

  2. Select the objects. Press Enter to finish the selection.

  3. Click the base point.

  4. Type the scale factor and press Enter.

 

Autodesk’s documentation describes the factor this way: a number greater than 1 enlarges the objects and a number between 0 and 1 shrinks them (Autodesk SCALE help). So 2 doubles every length, 0.5 halves every length, and 1 changes nothing.

 

Type the number, do not drag

 

After the base point, AutoCAD lets you move the mouse and watch the objects grow. That is fine for a rough sketch. For anything dimensioned, type the factor on the keyboard so the result is exact.

 

Where it goes wrong

 

  • Selecting too little. You scale the walls but not the doors, hatches or text. Use a crossing window or SELECTALL on a clean layer state, then check what is selected before you press Enter.

  • Locked or frozen layers. Objects on a locked layer cannot be scaled, and objects on a frozen layer are not selectable. The drawing then ends up half scaled.

  • Typing the inverse. If the drawing came out ten times too small, the fix is a factor of 10 on the already scaled geometry, not 0.1.

  • A careless base point. The geometry moves relative to the rest of the drawing. If you will drop the result back into an existing plan, choose the point you will use for placement.

 

Choosing a base point

 

The base point is the one place that stays still, so choose one that means something in the drawing: a wall corner, a grid intersection, an insertion point, the origin of a block. Then the scaled geometry grows from a point you can check. A base point picked at random in empty space sends the objects sliding across the screen, and the alignment work that follows costs more than the scaling did.

 

Scale Reference: when you know the length but not the factor

 

Often you do not have a factor. You have a plan pasted in from a scan or a PDF, and you know the door opening should be 900 mm, or a gridline should be 6,000 mm long. This is what the Reference option is for.

 

  1. Type SC, select the objects, and pick the base point.

  2. At the factor prompt, type R for Reference.

  3. Specify the reference length: click the two end points of the feature you are using, or type its current length.

  4. Specify the new length: type the length it should have.

 

AutoCAD works out the factor itself. The Reference option is described in the Autodesk SCALE help alongside the Copy option.

 

Worked example: a scanned floor plan

 

You bring a scanned plan into AutoCAD. A door that should be 900 mm wide measures 90 units. You could divide 900 by 90 and type 10. With Reference, you skip the sum: run SC, select everything, click the base point, type R, click both ends of the door, and type 900. The whole plan scales to a true 1:1.

 

Before you trust the result, measure a second dimension, ideally one far from the first. If both agree, the scan was clean. If they differ, the source drawing was distorted and uniform scaling cannot fix it. Autodesk notes that scale errors can come from inaccurate scanning, input mistakes or faulty exporting (Autodesk support).


Worked example: a scanned floor plan

Pick the longest reference you can

 

A short reference length magnifies any click error. Scaling from a 900 mm door gives less accurate results across a 40 m plan than scaling from a 12 m gridline. Use object snaps so your two clicks land exactly on the end points.

 

Scaling a drawing that is not at 1:1

 

Autodesk’s guidance for a drawing that is not at 1:1 is to divide the intended length by the measured length of a known object to get the scale factor (Autodesk support). Use DIST to measure the object first.

 

Situation

Measured

Intended

Factor

Plan drawn in metres, should be millimetres

6

6000

1000

Scan where a 900 mm door reads 90

90

900

10

Inch drawing that should be millimetres

1

25.4

25.4

Detail that was drawn at half size

450

900

2

After scaling, run DIST again on the same object to confirm it now reads the intended length.

 

“How do I scale to 1:500?” Two different questions

 

This is the question behind many searches, and it has two answers depending on what you mean.

 

You want to print or plot at 1:500. Do not scale the geometry. Keep the model at full size, 1:1, and set the scale of the layout viewport to 1:500. Autodesk lists three ways to set a viewport scale: from paper space, with the viewport scale tool in the status bar, or from the command line (Autodesk blog). If you created the viewport with the Insert View tool, AutoCAD locks it. Unlock it before you change the scale, or the change will not apply.


Viewport plotting scale versus geometry scaling

You received a drawing that was drawn at 1:500 and you need it at 1:1. The geometry is physically 500 times too small, so you scale the model by a factor of 500. Check a known dimension afterwards.

 

The habit worth building is drawing everything at real size and letting the layout handle the print scale. Our guide to model space versus paper space shows how to set up that split, and the architectural drawing setup guide puts it into a working template.

 

Annotation scale is a separate setting

 

Text, dimensions and hatches should not be scaled with the SCALE command to match a print scale. Annotative scaling does that: annotations adjust their size automatically with the viewport scale, so they look consistent at different scales (Autodesk support). If you scale a drawing with its text selected, the text height changes with it, which is almost never what you want. Our walkthrough of annotative scaling setup covers the settings, and the dimension style guide explains how dimension styles take part.

 

The Copy option

 

The Copy option scales a duplicate and leaves the original untouched. Use it when you want to compare a detail at two sizes, or when you are not sure the factor is right. Type SC, select, pick the base point, type C, then enter the factor. If the result is wrong, delete the copy and start again, and the source geometry is safe.

 

A checklist before and after scaling

 

Before:

 

  • Unlock and thaw the layers that hold the objects.

  • Decide on the base point.

  • Measure a known dimension with DIST and write the number down.

 

After:

 

  • Measure the same dimension again.

  • Check that dimensions, hatches and text did not change by accident.

  • Run ZOOM Extents to make sure nothing flew off to a distant corner of the drawing.

  • Save under a new name when you scaled a client file, so the original remains.

 

These small checks are the same habits we describe in our list of common AutoCAD drafting mistakes and how to fix them.

 

What we teach about scaling

 

Scaling looks like a one-minute command, and that is why it causes so many problems in office drawings. A plan arrives at the wrong size, someone scales it by eye, and three weeks later a dimension does not close.   In our courses we start from one rule: model at 1:1, set scale in the layout, and treat the SCALE command as a correction tool for imported or inherited files. We teach Reference first for anything that comes from a scan or PDF, because it ties the drawing to a length you can verify on site.   We build these habits through project-based exercises, so you scale real plans, check them, and place them in layouts the way an office does. The same workflow carries over into Revit, where getting units and scale right from day one saves even more time.   Steve

 

Build the habit with project work

 

Knowing the command takes ten minutes. Using it correctly on a real set of drawings, with layers, layouts, annotative text and plotting, takes practice on actual projects. Our AutoCAD Training course goes from beginner to advanced through project-based lessons, with direct trainer support, lifetime access to materials and a completion certificate. It costs €79, one-off. It is built by Autodesk Certified Trainer Steve Fagan, and it comes with a money-back guarantee.


S15studio

If your work is moving toward BIM, the same project-based approach is available for Revit in the Revit Course Only package, also €79 one-off.

 

Quick reference: the command at a glance

 

Task

Keystrokes

Scale by a known factor

SC, select, base point, factor

Scale to a known length

SC, select, base point, R, two points, new length

Scale a copy

SC, select, base point, C, factor

Check a length

DIST, pick two points

Set a print scale

Select viewport in layout, choose scale in the status bar

FAQ

 

How do I scale a drawing in AutoCAD?

 

Select the objects, run SC, pick a base point and type a scale factor. For layout printing, set the viewport scale instead of scaling the geometry. Autodesk describes both approaches in its scaling guidance.

 

How do I scale objects in AutoCAD to an exact size?

 

Use the Reference option. After picking the base point, type R, click the two ends of a feature whose current length you know, then type the length it should have. AutoCAD calculates the factor for you, so there is no sum to do.

 

How do I find the current scale of a drawing?

 

Measure an object whose true size you know with DIST, then divide the true length by the measured length. A result of 1 means the drawing is already at 1:1. Any other result is the factor you need to apply.

 

Why will my viewport not change scale?

 

The viewport is probably locked. Viewports made with the Insert View tool are locked by default, according to the Autodesk blog. Unlock it, set the scale, then lock it again so nobody changes it by accident.

 

Sources

 

Recommended

 

 
 
 

Comments


s15studio logo
  • Instagram
  • alt.text.label.YouTube
  • alt.text.label.Facebook
  • alt.text.label.LinkedIn
  • Discord

As an independent instructor, I am not affiliated with, endorsed by, or sponsored by Autodesk in any way. The Autodesk trademarks and logos are the property of Autodesk Inc. and are used under license. Any information, materials, or training provided by me are solely for educational purposes and are not intended to promote or sell Autodesk products or services.  Any views or opinions expressed are solely my own and do not necessarily reflect those of Autodesk. By using my services, you agree to these terms and conditions. All material on this website, including but not limited to text, images, graphics, videos, and audio files, is the property of S15Studio and is protected by copyright law. No material from this

website may be reproduced, copied, downloaded, or distributed in any form without prior written permission from S15Studio. Unauthorized use or reproduction of any material on this website may result in legal action.

©2026 by S15Studio

bottom of page