top of page

AutoCAD Page Setup: Layouts, Plot Settings and Named Setups

3 minutes ago
11 min read

Technician checking a plotted architectural layout

A page setup in AutoCAD is the saved set of plot settings attached to a layout: the printer or PDF plotter, the paper size, the orientation, the plot area, the scale and the plot style. You open it with the PAGESETUP command or by right-clicking a layout tab, set it once on a layout, save it under a name, and every sheet in the drawing set can then use it. This guide walks through each step, explains the settings that cause most plotting errors, and shows how to build setups that you reuse on every project.



TL;DR

 

  • Type PAGESETUP, or right-click the Model tab or a layout tab and choose Page Setup Manager, then click Modify to edit the settings.

  • On a layout, set the plotter, paper size, plot style table, plot area to Layout and plot scale to 1:1. The drawing scale belongs to the viewport, not the page.

  • Save the result as a named page setup and import it into other layouts or drawings, so a change is made once.

  • Plotting straight from the Model tab works too, but you must set units, plot area and scale yourself every time.

  • Check the dashed printable area and the paper size warning before you plot or publish.

 

Table of Contents

 

 

What a page setup controls

 

Autodesk’s documentation says that each layout stores its own page setup, which controls how the layout is displayed and printed, for example the sheet size and orientation. A layout is a paper-space sheet: the virtual piece of paper on which you place viewports (windows onto your model), a border and a title block. The page setup is the sheet’s instruction manual for the output device.

 

That distinction clears up the most common confusion. The model is drawn at full size in model space. The layout represents the paper. The page setup tells AutoCAD which paper, which device and which look. If you want the longer explanation of why the two spaces exist, our guide to model space versus paper space covers it.

 

A page setup bundles these items:

 

  • the printer or plotter (including a PDF driver)

  • the paper size and the drawing orientation, portrait or landscape

  • the plot area: what part of the drawing goes onto the paper

  • the plot scale and offset

  • the plot style table, which controls line weights and colors on paper

  • options for shaded viewports

 

Where to find the Page Setup Manager

 

There are three ways in, and all lead to the same dialog:

 

  1. Right-click the Model tab or a layout tab and choose Page Setup Manager. Autodesk’s Getting Started help says to make the tab you want to define current first, because the manager works on the active tab.

  2. Type PAGESETUP on the command line.

  3. Use the Application menu or the ribbon. The About Layouts page lists both as access points.

 

Inside the manager you can create named page setups, modify existing ones, or import setups from other drawings. The list shows two kinds of row. Rows with asterisks around the name are actual layouts. Rows without asterisks are named page setups that can be attached to layouts, as explained in an Autodesk AutoCAD blog post.

 

Setting up a layout page, step by step

 

This is the routine for a new sheet. Autodesk’s own support article on setting up layouts in a template drawing follows the same order.

 

1. Start from a suitable template

 

Autodesk recommends starting from a standard template: acadiso.dwt (metric) or acad.dwt (imperial) in AutoCAD, and acadltiso.dwt or acadlt.dwt in AutoCAD LT. In Ireland, where drawings are issued on ISO A-series paper, acadiso.dwt is the natural starting point. Where it goes wrong: starting from a drawing with an old, unrelated layout and inheriting its paper size and plotter without noticing.

 

2. Create and name the layout

 

Right-click the Model tab and choose New layout, then switch to it. Autodesk’s Getting Started help suggests the first thing to do is right-click the tab and rename it to something specific, with names that reference an ISO or ANSI size being a good choice. A name such as A1-Plan or A3-Details tells anyone opening the file what the sheet is, which matters once a drawing has a dozen of them.

 

3. Open the Page Setup Manager and click Modify

 

With the layout current, type PAGESETUP and click Modify. The dialog that opens is where every setting below is made.

 

4. Choose the plotter and paper size

 

Select the printer or plotter first, because the paper size list depends on it. Autodesk’s reference explains the Paper Size list shows the standard sizes available for the selected device. If the plotter does not support the layout’s current size, a warning appears and you can pick the plotter’s default size or a custom one. The size you choose is saved with the layout and overrides the PC3 file settings (the file that stores plotter configuration).

 

Set the orientation here too. Landscape suits most architectural sheets, but check the printable area before you commit.

 

5. Pick the plot style table

 

The plot style table decides how colors in the drawing turn into line weights and colors on paper. Choose the table your office standard uses, so a thin grid line and a heavy wall outline come out as intended. Where it goes wrong: leaving the table at None and wondering why every line plots at the same weight.

 

6. Set the plot area to Layout and the scale to 1:1

 

For a layout, choose Layout as the plot area and leave the plot scale at 1:1. Autodesk notes that when Layout is the plot area, the layout plots at 1:1 regardless of the plot scale specified. This is the point where beginners often try to type 1:50 into the page setup. Don’t. The drawing scale is set on the viewport, which is the next step.


Layout plots at one to one; viewport sets drawing scale

7. Click OK, then Close

 

The sheet now shows the correct paper. A dashed line marks the printable area, so you can see immediately whether your border sits inside it.

 

8. Add the border, title block and viewport scale

 

Insert your border and title block, then create a viewport and set its scale. Autodesk’s article describes selecting the viewport and typing PROP to choose a standard scale or a custom ratio, or using the status bar scale menu. If you are building a standard sheet, our guide to title block setup shows how to organize the fields so they are filled from the start, and the scale command guide covers viewport scales in more detail. Once the viewport is right, lock it so a stray scroll of the mouse wheel cannot change the scale.

 

A custom ratio worth understanding: Autodesk’s example is a drawing in centimeters on a layout in millimeters. For a 1:100 viewport, you enter 0.1, meaning 10 mm of paper space to 100 cm of model space. Press Ctrl+P afterwards to confirm the plot dialog shows the settings you specified in the page setup.

 

The plot settings that matter

 

The Page Setup dialog and the Plot dialog share the same controls. Autodesk’s Onboarding lesson on organizing and outputting a design with layouts lists them, and its worked example uses the AutoCAD PDF (General Documentation).pc3 plotter, ANSI A paper, plot area Layout, scale 1:1 and landscape orientation. Here is what each does and what usually trips people up.

 

Setting

What it does

Typical mistake

Printer/plotter

Chooses the device or PDF driver, and so the available paper sizes

Changing it after choosing paper, then losing the size

Paper size

Sets the sheet, saved with the layout

Picking a size the plotter lacks and ignoring the warning

Orientation

Portrait or landscape

Content sits outside the printable area after a switch

Plot area

Layout, Extents, Display, View or Window

Using Extents on a layout, so the scale shifts

Plot scale

Ratio of plotted units to drawing units

Setting a scale on a layout instead of on the viewport

Plot offset

Moves the plot origin on the paper

Centering a Window plot and expecting it to work for Layout

Plot style table

Maps colors to line weights and colors on paper

Leaving it unset, so lines plot with inconsistent weights

On the plot area, Autodesk’s -PAGESETUP command reference lists Display, Extents, Limits, Layout, View and Window. The same page notes that the Center offset option is not available when the plot area is Layout, which is one more reason to use Layout for sheets and leave Window for quick model-space prints.

 

The same reference documents the command-line version, -PAGESETUP, with prompts for paper units, orientation, plot upside down, plot area, scale and offset. It is handy for scripts and for anyone who prefers the keyboard.

 

Save a named page setup and reuse it

 

Setting up every layout by hand is how offices end up with sheets that print differently. A named page setup fixes that. Autodesk’s help on working with named page setups describes the sequence:

 

  1. In the Page Setup Manager, click New and give the setup a name.

  2. Start from an existing setup, then adjust the settings.

  3. Click Set Current to apply it to the active layout.

  4. On other layouts, select the name in the list and click Set Current.

  5. To bring setups from another drawing, click Import. You can import model space and layout setups together, and you can save plot dialog overrides as a new named setup with Add.

 

Autodesk’s blog describes a named setup as working like a reference file: associate it with several layouts and a change to the named setup updates all of them. The author also recommends opening a .DWT template and creating layouts for the different sheet sizes and plotters you use, including one for PDF output.

 

In practice, a sensible template carries a handful of named setups: one per sheet size you issue (A1, A3), plus a PDF one. Our architectural drawing setup guide shows where this fits in a full template.

 

For the command-line route, Autodesk’s -PSETUPIN reference says the command asks for the drawing file and the name of the setup to import, and typing ? lists the custom setups in that drawing. Set FILEDIA to 0 if you want prompts instead of a file dialog.

 

Plotting from model space

 

Sometimes you just need a print of the model, with no layout. The page setup still applies to the Model tab, and Autodesk’s support article lists the order:

 

  1. Draw at actual size, 1:1, and check units with -DWGUNITS, which offers millimeters, centimeters and meters among its options.

  2. Press Ctrl+P to open Plot and select the plotter.

  3. Set page size, orientation, plot style table and offset.

  4. Choose the plot area, for example Window around the part you want.

  5. Clear Fit to paper and choose a standard or custom scale.

 

The article’s example for a 1:100 print of a centimeter drawing is to enter 10 in the top box and 100 in the bottom. Mixing up units is the most frequent reason a model-space plot comes out ten or a thousand times too small.

 

If you plot the same way often, Autodesk notes you can select Default to Previous Plot so the current settings carry to your next plot. For anything that goes to a client or a contractor, a layout with a named setup is more repeatable.

 

Check the page before you plot or publish

 

A short check saves reprints:

 

  • Dashed line. Autodesk’s reference says the printable area is shown by a dashed line in the layout. Keep the border and title block inside it.

  • Paper size warning. If the plotter does not support the layout’s paper size, AutoCAD warns you. Choose a supported size rather than clicking through.

  • Initialized layouts. Before a layout can be published, its paper size must be defined as something other than 0 x 0. A layout that has never had a page setup applied will be rejected by PUBLISH.

  • Matching spaces. In the Publish dialog, model space page setups apply only to model space sheets, and paper space setups only to paper space sheets.

  • Preview. Use Plot Preview before sending the job out.

 

If the output is a PDF for issue, the plotter choice and quality settings matter as much as the paper. Our article on AutoCAD PDF export settings goes through them. And if your text and dimensions come out at the wrong size on the sheet, annotative scaling is usually the fix.

 

Our view: set up once, in the template

 

We teach page setup as part of a drawing standard, not as a dialog to be fought on the afternoon of a deadline. The pattern that works is simple: one template, one layout per sheet size, one named page setup per layout, and the scale held on the viewport.   The mistakes we see people make in training projects are rarely about a missing button. They come from mixing up where the scale lives, or from rebuilding a sheet by hand when a saved setup would have done it in one click. Our AutoCAD course is project-based for this reason: you build real sheets from a real drawing, so the setup becomes a habit rather than a memory exercise.   Learn the routine on one project, save it in your template, and every later drawing starts at the point where most people finish.   Steve

 

Learn the full routine on a real project

 

Page setup is one link in a chain: drawing at the right scale, organizing layers, building layouts, issuing PDFs. Our AutoCAD Training course takes you through that chain from beginner to expert level using project-based lessons. It costs €79 as a one-off payment, includes direct trainer support, lifetime access to the materials and a completion certificate, and comes with a money-back guarantee. The course was created by Autodesk Certified Trainer Steve Fagan.


S15studio

If you work in BIM as well, the same site offers Revit training at €79, so your sheets and drawings follow one consistent method across both programs.

 

FAQ

 

Where is the Page Setup Manager in AutoCAD?

 

Right-click the Model tab or any layout tab and choose Page Setup Manager, or type PAGESETUP. Make the tab you want to define the current one first, because the manager acts on the active tab. It is also available from the Application menu and the ribbon.

 

Why does my layout plot at 1:1 when I set another scale?

 

When the plot area is Layout, the layout plots at 1:1 whatever plot scale is entered. That is correct behavior. The drawing scale, such as 1:50, is set on the viewport inside the layout, using the Properties palette or the status bar scale menu.

 

Can I use the same page setup in several drawings?

 

Yes. In the Page Setup Manager, click Import and pick a drawing that is already set up, or use -PSETUPIN at the command line. The best practice is to keep your named setups in a .DWT template so every new drawing starts with them.

 

What is the difference between page setup and the Plot dialog?

 

They share the same controls, but a page setup is saved with the layout and can be named and reused. The Plot dialog applies settings to a single job, though you can save them as a new named setup with the Add button.

 

Why can’t I publish a layout?

 

A layout must have its paper size defined as something other than 0 x 0 before it can be published. Open the Page Setup Manager on that layout, click Modify, choose a plotter and a paper size, and try again.

 

Sources

 

Recommended

 

 
 
 

Comments


s15studio logo
  • Instagram
  • alt.text.label.YouTube
  • alt.text.label.Facebook
  • alt.text.label.LinkedIn
  • Discord

As an independent instructor, I am not affiliated with, endorsed by, or sponsored by Autodesk in any way. The Autodesk trademarks and logos are the property of Autodesk Inc. and are used under license. Any information, materials, or training provided by me are solely for educational purposes and are not intended to promote or sell Autodesk products or services.  Any views or opinions expressed are solely my own and do not necessarily reflect those of Autodesk. By using my services, you agree to these terms and conditions. All material on this website, including but not limited to text, images, graphics, videos, and audio files, is the property of S15Studio and is protected by copyright law. No material from this

website may be reproduced, copied, downloaded, or distributed in any form without prior written permission from S15Studio. Unauthorized use or reproduction of any material on this website may result in legal action.

©2026 by S15Studio

bottom of page