top of page

AutoCAD Study Guide: What to Learn and in What Order

5 minutes ago
9 min read

Learner practising an AutoCAD architectural plan

The fastest way to learn AutoCAD is to study it in a fixed order: the drawing environment first, then draw and modify commands, object snaps, layers, hatching and blocks, and only then layouts and plotting. Practise each topic on a small drawing before you move on. Our AutoCAD Training course follows that order through real projects, and this guide gives you the same sequence to study from, whatever route you take.

 

It is written for architecture students, graduates and technicians who will draw buildings in AutoCAD and probably move on to Revit.



TL;DR

 

  • Study in this order: interface and file handling, draw and modify commands, object snaps, layers and linetypes, hatching, blocks, then dimensions, layouts and plotting.

  • A university CAD module, TU Dublin’s CIVL 1604, covers the same core topics, so this list matches what beginners are taught in a degree.

  • Learn by drawing a real plan, section and elevation, not by memorising a list of commands.

  • AutoCAD is 2D drafting and Revit is 3D BIM modelling, so AutoCAD is a sound first step for architectural work.

  • Plan four to six weeks of steady practice for confident basics, and longer for advanced blocks, external references and customisation.

 

Table of Contents

 

 

What to study first: the core topics

 

A study guide is only useful if its order is right. Beginners often jump to 3D or to fancy commands and then struggle to produce a clean, accurate plan. The better model is a university syllabus. The TU Dublin module page for CAD and Engineering Graphics 1 lists the AutoCAD topics taught to first-year students: the drawing environment and basic CAD concepts, creating, opening and saving drawings, user coordinate systems, basic draw commands, modify commands, object snap, pattern fills and hatching, layers and linetypes through the Layer Properties Manager, and reusable blocks.

 

Here is how to turn that list into study units.

 

1. The drawing environment and file handling

 

Learn the screen before the commands: the ribbon, the command line, the drawing area, the status bar and the model space where you draw. Practise starting a new drawing, saving it, reopening it and setting units. Set your units to millimetres for architectural work, since a drawing started in the wrong units causes scaling trouble later.

 

The user coordinate system (UCS) is the origin and direction AutoCAD uses to read your coordinates. For 2D drafting you rarely change it, but you should know what it is and how to type absolute and relative coordinates.

 

2. Draw commands

 

The first commands to learn are line, polyline, arc, rectangle, circle and ellipse. The key habit is to type distances and angles precisely rather than clicking roughly. A wall drawn at 3,012 mm instead of 3,000 mm will cost you time in every later step.

 

Learn the difference between a line and a polyline early. A polyline is one connected object, so it is easier to offset, select and measure. Most architectural outlines are better as polylines.

 

3. Modify commands

 

Drawing is perhaps a third of the work. The rest is editing: move, copy, rotate, stretch, trim, extend, explode and break. Offset and fillet are worth adding on the first pass, because they build walls and corners fast. Practise trim and extend until they feel automatic, since you will use them on every drawing you ever make.

 

4. Object snaps

 

Object snaps lock your cursor to exact points such as endpoints, midpoints, centres and intersections. Without them a drawing looks right on screen but is slightly off, and the error shows when you dimension or plot. Treat snaps as the single most important accuracy tool and switch them on from day one.

 

5. Layers and linetypes

 

Layers separate walls, doors, dimensions, text and hatching so you can control what is visible and how it prints. Study the Layer Properties Manager: colour, linetype, lineweight, freeze, lock and plot settings. Set up a simple layer scheme before drawing anything, such as A-WALL, A-DOOR, A-GLAZ, A-DIMS and A-TEXT, and use it consistently. Consistent layering is what makes a drawing readable by someone else in the office.

 

6. Hatching and pattern fills

 

Hatches show materials and cut elements in sections and plans. Learn to pick a pattern, set its scale and apply it to a closed boundary. If a hatch will not fill, the boundary has a gap, which is a good reminder of why snaps matter.

 

7. Blocks

 

Blocks are reusable objects: a door, a window, a toilet, a north arrow. Make one, insert it, then edit it and watch every copy update. This is the first step toward working efficiently, and it is also good preparation for the way families work in Revit.

 

8. Dimensions, text, layouts and plotting

 

Once you can draw accurately, learn dimension styles, text styles, paper space layouts, viewports and plot styles. This is what turns a model into a drawing someone can build from. Many learners leave this until last and then discover that a plan which looks fine on screen prints at the wrong scale.

 

A four-week study plan

 

This plan assumes about 45 to 60 minutes a day. It is a sensible structure rather than a fixed rule, so adjust the pace to your timetable.

 

Week

Focus

What you should be able to do at the end

1

Interface, files, units, coordinates, line, polyline, rectangle, circle

Draw a simple room outline to exact dimensions and save it

2

Modify commands, offset, fillet, object snaps

Draw a one-room plan with walls, door and window openings, without guessing any points

3

Layers, linetypes, hatching, blocks

Produce a layered plan with hatched walls and inserted door and furniture blocks

4

Dimensions, text, layouts, plotting

Print or export a scaled PDF with title block, dimensions and notes

After week four, move to a full house plan, then a section and an elevation of the same house. Drawing three related views of one building teaches you more than ten unrelated exercises, because you must make them agree with each other.

 

How to practise so it sticks

 

Watching tutorials feels productive, but the skill comes from drawing. Use this routine for every topic.

 

  1. Learn one command. Watch or read how it works, then try every option once.

  2. Use it on a small task. Draw something with a known answer, such as a 4 m by 3 m room with 100 mm walls.

  3. Check the result. Use the distance and list tools to confirm your dimensions. If it is off, find out why.

  4. Repeat without help. Redraw the same thing from memory the next day.

  5. Add it to a project. Reuse the command in your running house plan.

 

Timed redraws are especially useful. Draw a plan, delete it, and draw it again in half the time. Speed comes from keyboard shortcuts and good habits, not from rushing.

 

For ready-made exercises, our guide to AutoCAD practice projects for beginners and intermediates lists 20 of them in a sensible order. If you want a worked example to follow, the AutoCAD house plan tutorial takes you through a floor plan step by step. For a broader roadmap beyond the basics, see our AutoCAD learning path.

 

Can you learn AutoCAD in two weeks?

 

You can get started in two weeks, but you should not expect to be fluent. In that time, a focused learner can usually reach the point of drawing and editing a simple plan using the command line, snaps and layers. Those parts of the software are quick to pick up. Advanced topics are slower: dynamic blocks, external references, sheet sets and LISP customisation come with months of regular use on real drawings.

 

A better target is this: after two weeks you can draw a basic room accurately, and after four to six weeks you can produce a complete small plan with layers, hatching, dimensions and a scaled print. After that, your speed and judgement grow with each project.


AutoCAD learning milestones from weeks to months

Books, notes and other study material

 

A good study guide mixes formats. Each has a job.

 

  • Printed or digital books. A textbook gives you structure and reference. Autodesk’s official press series is a typical example: the Autodesk Official Press title Mastering AutoCAD and AutoCAD LT by George Omura combines concise explanations, focused examples, step-by-step instructions and hands-on projects, including interface basics, drafting tools, hatches and fields. Software changes every year, so choose an edition close to the version you use, and treat the principles as lasting and the menu locations as changeable.

  • Short written notes. One page per topic, with the command, its shortcut and a mistake to avoid. Writing your own notes helps you remember more than copying someone else’s.

  • Video lessons. Best for seeing a command in motion. Pause and copy each step in your own copy of the software.

  • Project work. The real test of learning. A set of plans from your own course or a small building you know well is ideal.

 

Our own courses come with downloadable PDF notes and ebooks, so you can keep a reference beside you while you draw.

 

From AutoCAD to Revit

 

Most architecture students end up needing both programs. AutoCAD is 2D drafting software and Revit is 3D BIM (building information modelling) software, where you build a model and the plans, sections and elevations are generated from it. An open textbook from Iowa State University, Tutorials of Visual Graphic Communication Programs for Interior Design, follows exactly this route. It teaches AutoCAD in seven chapters covering floor plans, dimensions and components, elevations and sections, ceiling plans, sheet setup, and symbols and prints, and then moves on to Revit and Enscape for rendering.

 

That order works because AutoCAD teaches you what a drawing must contain. When you later model in Revit, you already know what a good plan, section and set of layers look like. Skills carry over directly: layers become categories and visibility settings, blocks become families, and plotting layouts become sheets.

 

If you are deciding how deep to go on 2D versus 3D inside AutoCAD itself, our 2026 guide to 2D versus 3D drafting helps you choose. For the architecture-specific view, read what students must know about AutoCAD for architecture.


From AutoCAD to Revit

Why it is worth the effort in Irish practice

 

Skills in both programs show up in real job requirements. John Fleming Architects, a Dublin commercial practice, states that it uses Revit, AutoCAD, SketchUp, Photoshop and InDesign, and its Architectural Technologist role asks for excellent AutoCAD and SketchUp skills with competence or knowledge of Revit. One practice is not the whole market, but it shows what a hiring office can expect from a graduate: strong AutoCAD, plus working knowledge of Revit.

 

For our reasoning on why architects need both tools, see why AutoCAD and Revit are must-have tools for architectural practices.

 

Common study mistakes

 

  • Skipping object snaps. Drawings that look right but are not exact. Fix this in week one.

  • Using one layer for everything. The drawing becomes impossible to edit or print cleanly.

  • Learning 3D too early. Solid 2D drafting makes 3D far easier.

  • Memorising commands without a project. You forget them within days.

  • Ignoring layouts and plotting. A drawing that cannot be printed to scale is not finished.

  • Never redrawing. Repetition is how the commands move from your head to your hands.

 

Our perspective

 

We teach AutoCAD to people who will draw real buildings, and the pattern is always the same: learners who finish a whole project learn faster than learners who collect commands.   That is why our AutoCAD training is project-based. You draw a plan, then the sections and elevations, then set up layouts and print, so each command arrives when the work needs it. Trainer support and lifetime access to the materials mean you can return to a topic when a real job demands it.   If you are an architecture student or technician, our advice is to build the 2D foundation properly and add Revit when you are ready. Both skills together are what offices look for, and our courses are built around that path, with exam practice for the Autodesk Certified User certifications when you want a recognised credential.   Steve

 

Study with a guided course

 

If you would rather follow a structure than build your own, our AutoCAD Training course takes you from beginner to expert through project-based lessons. It costs €79 one-off, includes direct trainer support, lifetime access to the materials and a completion certificate, and comes with a money-back guarantee.


S15studio

If you plan to learn both programs, the Complete Revit and AutoCAD Training bundles them with exam practice for Autodesk Certified User certification. Browse everything on s15studio.com.

 

FAQ

 

What are the basics of AutoCAD?

 

The basics are the drawing environment, saving and opening files, coordinates, draw commands, modify commands, object snaps, layers and linetypes, hatching, and blocks. University CAD modules such as TU Dublin’s CIVL 1604 teach these first. Dimensions, layouts and plotting follow once you can draw accurately.

 

Can I learn AutoCAD in two weeks?

 

You can learn enough in two weeks to draw and edit a simple plan with snaps and layers. Full confidence with a complete drawing set usually takes longer, and advanced features such as external references, sheet sets and customisation take months of practice. Daily drawing on a real project is the quickest route.

 

Do I need AutoCAD if I am going to use Revit?

 

For architectural work, yes, in most cases. Offices commonly use both, and a Dublin practice such as John Fleming Architects lists AutoCAD alongside Revit among its tools. AutoCAD gives you the drafting fundamentals that make Revit models and sheets easier to understand.

 

What is the best way to practise AutoCAD?

 

Draw complete small projects: a room, then a house plan, then its section and elevation. Redraw them from memory and time yourself. Our AutoCAD practice projects give you a graded set to work through.

 

Sources

 

Recommended

 

 
 
 

Comments


s15studio logo
  • Instagram
  • alt.text.label.YouTube
  • alt.text.label.Facebook
  • alt.text.label.LinkedIn
  • Discord

As an independent instructor, I am not affiliated with, endorsed by, or sponsored by Autodesk in any way. The Autodesk trademarks and logos are the property of Autodesk Inc. and are used under license. Any information, materials, or training provided by me are solely for educational purposes and are not intended to promote or sell Autodesk products or services.  Any views or opinions expressed are solely my own and do not necessarily reflect those of Autodesk. By using my services, you agree to these terms and conditions. All material on this website, including but not limited to text, images, graphics, videos, and audio files, is the property of S15Studio and is protected by copyright law. No material from this

website may be reproduced, copied, downloaded, or distributed in any form without prior written permission from S15Studio. Unauthorized use or reproduction of any material on this website may result in legal action.

©2026 by S15Studio

bottom of page