Revit Massing: Conceptual Masses, In-Place Masses and Site

Revit massing is the part of the software where you sketch a building as simple volumes, test those volumes against area and zoning targets, and then convert the winning shape into real floors, walls, roofs and curtain systems. You build a mass either inside a project (an in-place mass) or in a separate conceptual mass family that you load in. Topography now sits beside it on the same tab, built with toposolids. This guide covers both, in the order you will use them on a real project.
TL;DR
Use an in-place mass for a one-off form in one project. Use a conceptual mass family when you want to reuse the shape, place several copies, or work in the full conceptual environment.
Masses give you gross floor area through mass floors, so you can check area targets before any detailed modeling.
When the shape is settled, Model by Face tools turn the mass into floors, walls, roofs and curtain systems.
Terrain is modeled with toposolids from the Massing & Site tab. The older toposurface can be converted.
Keep masses simple. Unique, heavy geometry is where files slow down.
Table of Contents
What Revit massing is for
Massing exists so you can decide the big things early without drawing detail you will throw away. Autodesk describes massing studies as a way to explore design ideas with shapes and then add building elements directly to those shapes once the concept is complete.
In practice, a mass lets you do three things that matter in the first weeks of a scheme:
Compare options quickly. Elise Moss, in her Revit Architecture textbook, notes that mass elements give a conceptual idea of the space and shape of a building without a lot of detail, so alternatives can be created quickly and approved before heavy effort goes in.
Check numbers. Autodesk’s help notes that massing studies let you study zoning compliance visually and numerically by relating the mass to the zoning envelope and floor area ratio.
Generate real elements. The same page confirms you can create floors, roofs, curtain systems and walls from mass instances, with control over category, type and parameters.
If you are early in your Revit journey, it helps to see where massing sits in the larger learning path. Our guide on what to learn in Revit as an architect lays that out. Massing is also one small piece of how the industry is changing, as covered in this piece on construction industry automation.
In-place mass or conceptual mass family?
This is the first decision, and it is simpler than it looks.
In-place mass | Conceptual mass family | |
Where you build it | Inside the project, on the Massing & Site tab | In a separate family file, then loaded |
Best for | A unique form used once | A shape you reuse, place several times, or share across projects |
Environment | In-place editing within the project | Full conceptual design environment with adaptive components and parametric control |
Risk | Heavy in-place geometry can bloat the file | Needs an extra step to load and update |
Autodesk’s guidance on in-place elements says to create one when your project needs unique geometry you do not expect to reuse, or geometry that must keep a relationship to other project geometry. The same page recommends transferring or copying in-place elements between projects only when necessary, because they can increase file size and affect performance.
A rule we use when teaching: if you can imagine wanting the shape in a second project, or three copies of it on one site, build a family. If it is a site-specific volume that will never travel, go in-place.
How to create an in-place mass
Open the Massing & Site tab and choose In-Place Mass.
Name the mass. Revit will ask whether to turn on Show Mass mode if it is off.
Draw a closed profile with the line tools, such as a rectangle, polygon or free-form outline.
Select the profile and choose Create Form. Revit offers a solid or void extrusion.
Edit the form. Select a face, edge or vertex and drag the arrows, or change the levels and profiles.
Click Finish Mass.
A closed contour of lines becomes an extrusion, and you reshape it by modifying levels, lines and points of each face, as Arch2O’s walkthrough explains.
Fixing the mass that only moves at the top
A common frustration: you move a line and only the top or bottom edge follows. Autodesk’s support article on editing a mass in plan gives the fix. Select the mass and click Edit In-Place, cross-select all profile lines, click Lock Profiles, then double-click one profile line so all the lines become editable together.
How to create a conceptual mass
The conceptual mass environment is where complex and parametric forms live. Autodesk’s conceptual mass workflow runs like this:
Start a new family using a Mass or Generic Model Adaptive template.
Sketch points, lines and 2D shapes.
Extrude the 2D geometry into a form.
Optionally divide the surfaces or apply parametric components.
Load the mass into your project and place it.
A useful example is the twisted tower, the exercise many tutorials use. You draw a square profile on one level, copy it to a higher reference plane, rotate the upper profile, select both and create a form. The twist comes from the rotation between profiles, and you can drive the angle with a parameter if you want to adjust it later.
Family thinking matters here. If building a parametric family is new to you, our one-sitting parametric family tutorial gives you the habits (reference planes, parameters, flex tests) that make conceptual masses far less fragile.
Mass floors and area checks
Once a mass exists in your project, you can get area data from it without drawing a single floor.
Select the mass.
On the contextual tab, choose Mass Floors.
Tick the levels where you want floor slices.
Create a schedule from the Mass category with fields such as gross floor area, gross volume and gross surface area.
This is how you answer “does this scheme meet the brief?” in minutes. Compare the total gross floor area to your target, then adjust the mass height or footprint and watch the numbers update. Autodesk’s help describes the numeric check against the zoning envelope and floor area ratio as one of the main purposes of the massing study tools.
Two practical tips:
Make sure your levels exist before you add mass floors. A mass that spans levels with no floor slices will give you no area data.
Mass floors are not real floors. They are analytical slices. Convert the mass when the design hardens.
Turning a mass into building elements
When the form is approved, use Model by Face: Wall by Face, Floor by Face, Roof by Face and Curtain System by Face, all on the Massing & Site tab.
Choose the tool, for example Wall by Face.
Pick the wall type in Properties.
Click the mass faces.
For floors, use Floor by Face after you have created mass floors.
Autodesk’s help states that you fully control regeneration of these elements when the mass changes. In use, that means when you edit the mass, you should select the face-based elements and run Update to Face to bring them in line. Do this deliberately and check the result, especially if you have rebuilt the mass geometry rather than editing it.
Once elements exist, you can refine them with the usual detailing tools. A curtain system from a mass face is a good example: it gives you the grid layout, and then you can swap panel types. For related family work, see how to load and schedule window families so your openings are ready when the facade is.
Testing options without duplicating the model
Massing is most powerful when you compare several schemes. Rather than saving copies of the file, use design options so each massing variant lives in the same model. We cover that in our design options workflow.
Revit topography: toposolids in current Revit
Site modeling used to mean the toposurface. Current Revit uses the toposolid, which has thickness, layers and cleaner behavior with structure and excavation. Autodesk’s help states that to represent site topography you create a toposolid from the Massing & Site tab, Model Site panel, using tools including Toposolid, Create from Sketch, Create from Import, Sub-Divide and Graded Region.
Three ways to create terrain
Place points. Add spot elevations by hand. Good for small, simple sites.
Create from Import. Bring in CAD contours or point data from a surveyor. This is the usual route for real sites, and a clean, correctly positioned survey file makes everything else easier.
Create from Sketch. Sketch a boundary and assign elevations to build the surface.
A contour-line view appears automatically on the surface. You control the interval and display in the Site settings, which is where you tune the contour lines you see in plan.
Keep the surface light
Every point in a topography creates triangulated geometry, which adds computational overhead. Autodesk notes you can simplify an element built from a large number of points to improve performance, though accuracy and contour geometry may be affected. In practice: import only the survey area you need, and simplify dense point clouds before you start modeling.
Subdivisions and graded regions
Use Sub-Divide for areas like paving, lawn or a road without cutting the terrain apart. Use Graded Region to model proposed ground levels with cut and fill. Autodesk’s 2026 notes say a new sub-division can follow the host toposolid geometry and be offset above or below it, and that the cut and fill calculations for graded regions were revised for greater accuracy, with volumes beyond the boundary no longer included.

Excavation and building pads
Revit 2025 added excavation tools. The release notes say you can cut an existing toposolid using floors, roofs, masses or other toposolids, with excavation volume parameters, and that face-based families can be hosted on the exposed sides of an excavation. For flattening ground under a building, our explainer on the Revit building pad shows the older and simpler approach, and when it still helps.
Toposurface: what happened to it
If you open an older project, you will find toposurfaces. They can be converted. Autodesk’s help describes how toposurface sub-regions generate toposolid subdivisions and types that inherit the original sub-region’s material at a default thickness. Convert once, check the materials, and continue in toposolids.
Combining massing and site
This is where the two halves meet. Revit 2025 lets you create toposolids with the Model by Face tool from any non-vertical surface of a mass element, which gives you more freedom with complex terrain, as Autodesk’s 2025 release overview explains. That is handy for landforms, berms, terraces and stepped landscapes that you first block out as simple volumes.
A workable site massing sequence:
Import survey data and create the existing toposolid.
Place your building mass at the right position and elevation.
Use the mass or a floor to excavate the toposolid where the building sits.
Add graded regions for access routes and landscape moves.
Check cut and fill, then run options if the earthwork balance is poor.
On Irish sites, which often slope and come with survey data in a local grid, setting up shared coordinates before you import saves a lot of trouble. Do that on day one, not after the model is built.
Common mistakes and how to avoid them
Over-detailed masses. A mass should be simple enough that you can change it in a minute. If you are modeling window reveals, you are past massing.
Everything in-place. Several unique in-place masses are fine. Dozens of heavy ones make the file harder to manage, so switch to families when you repeat shapes.
No levels. Mass floors and area data depend on levels. Set them before you start slicing.
Forgetting Show Mass. Masses can be hidden by default in views. Toggle Show Mass Form and Floors in the Massing & Site tab.
Dense survey data. Trim and simplify points before importing.
Not updating face-based elements. After editing a mass, update the walls, floors and roofs hosted on it.
Our perspective
Massing is where students and junior architects first feel Revit working with them instead of against them. A few shapes, a schedule of floor areas, and suddenly you can answer a client’s question in the meeting rather than next week. What we teach is a project habit more than a toolset: start with the simplest mass that answers the question, test it with numbers, and only then convert it into real elements. Keep one-off forms in-place, build families when the shape will repeat, and bring the site in early so the building never floats above an imaginary flat plot. Our courses are built around real project workflows for exactly this reason. You learn massing, then walls, floors and sheets on the same project, so each step has a purpose. Lifetime access to the materials means you can return to the massing and site lessons whenever a new project needs them. Steve
Learn Revit massing on a real project
If you want the whole workflow rather than isolated tricks, our project-based Revit training takes you from the basics through intermediate and advanced work. The Revit Course Only is €79 one-off, and includes direct trainer support and certificates, with lifetime access to the materials. If you are brand new, the Revit Introduction is €20 one-off. Our course comes with a money-back guarantee.

Want a free taste first? Our YouTube channel has free Revit lessons you can follow along with.
FAQ
What is the difference between an in-place mass and a conceptual mass?
An in-place mass is built inside your project and suits a unique form you will not reuse. A conceptual mass is a separate family built in the conceptual design environment, then loaded into the project. Choose the family route when you want to place several copies or reuse the shape in other projects.
How do I get floor area from a Revit mass?
Select the mass, choose Mass Floors, and tick the levels you want. Then create a schedule in the Mass category and add gross floor area and gross volume fields. This gives you quick area checks against a brief or zoning limits before you model real floors.
Is the toposurface still used in Revit?
Toposolids are the current tool for site topography, and Autodesk provides a route to generate a toposolid from a toposurface in older projects. Convert it, check the materials, and continue modeling with toposolids.
Can I turn a mass into walls, floors and roofs?
Yes. Use the Model by Face tools: Wall by Face, Floor by Face, Roof by Face and Curtain System by Face. If you later edit the mass, update the face-based elements so they follow the new shape.
Sources
Recommended

Comments